Neff H5972NOGB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff H5972NOGB/01

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 9, 2010 at 5:55 pm #59467
    SWERV
    Participant

    Hi,
    I have replaced the main board on this, it now comes up with ER18, and also the display is in German. Can anyone help please!!
    Regards
    Merv

    December 9, 2010 at 6:58 pm #338273
    nomadPaul
    Participant

    ER18 is EEPROM failed initialisation.

    To sort this out :-

    Enter test mode

    press the clock button
    press 90W
    press the memory button
    press 1000w
    press the start button

    Now turn the programme selector 5 positions to the right – EEPROM should display
    Press START – EEPROM

    When its finished it should show EEPROM oo and then the EEPROM should be initialised.

    Once this is done , check the customers manual to set language etc

    December 9, 2010 at 8:19 pm #338274
    SWERV
    Participant

    Re: Neff H5972NOGB/01

    Cheers, will give that a go and report back.
    Merv

    December 10, 2010 at 9:07 am #338275
    SWERV
    Participant

    Re: Neff H5972NOGB/01

    Hi,
    I have done the eeprom set up but, it showed 11 instead of 00.
    I also done an inverter test, and it showed H98 in the display, are you able to tell me what that means?.
    Thanks for your help.
    Merv

    December 13, 2010 at 9:28 am #338276
    SWERV
    Participant

    Re: Neff H5972NOGB/01

    bump

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.