Indesit WE12 error F12

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WE12 error F12

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 3, 2004 at 12:29 pm #5961
    admin
    Keymaster

    Washing cycle complete, spun and clothes out but flashing F12 error. Have turned the mains off but still there

    August 3, 2004 at 1:02 pm #114801
    Martin
    Participant

    Re: Indesit WE12 error F12

    It may be a faulty circuit board or connection to it type problem. )The error actually means that the display board and control module are not talking to one another 😥 )

    Try ‘Resetting’ the machine (see user instructions) and try again. 🙂

    Also if you need to reply, please give us the FULL model number as there are 2 variants of this baby 😉

    Martin

    August 3, 2004 at 1:49 pm #114802
    admin
    Keymaster

    Re: Indesit WE12 error F12 Evolution

    I have mislaid the manual and I am not sure how to reset the machine. Do you know where i can get a list of error codes from?

    August 3, 2004 at 2:07 pm #114803
    Dave_Conway
    Participant

    Re: Indesit WE12 error F12 Evolution

    Anonymous wrote:I am not sure how to reset the machine.

    Turn the washer off, then turn the dial to any black dot. Now turn the washer on and you should see the power indicator light flash 3 times. On the third flash turn washer off again and select a wash programme. Turn the washer on again and after a couple of seconds the machine should start.

    Like that 😉

    Dave.

    August 3, 2004 at 3:15 pm #114804
    Martin
    Participant

    Re: Indesit WE12 error F12

    Well actually this model will likely have a ‘Display Unit’. To reset these (I think) you need to press and hold the ‘Programme Start’ button for 3 to 5 seconds. That should clear the previous programme setting on the display (hopefully) 🙂

    Martin

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.