- This topic has 8 replies, 5 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Engineer been out to WDL540 which drains for about 5 seconds then stops, pump filter etc are ok. Any ideas please I am thinking poss board? Cheers Kez
Re: Hotpoint WDL540 drains for approx 5 seconds then stops
On all settings even when set to spin only?
Re: Hotpoint WDL540 drains for approx 5 seconds then stops
Does it not throw up an error message Rob, even if set to the drying cycle for instance ?
Jim.
it does if you set it on a dryer and leave it 15 minutes
but it doesnt on the wash, it just stops deadit is only on the arcadia version though
Re: Hotpoint WDL540 drains for approx 5 seconds then stops
On behalf of kez,thanks for the info helo 75 turned out to be spot on ,one to file in the memory banks for future use 😀
for future reference guys – and try and keep this in mind
these machines are a real pita
turning themselves on in the middle of the night.. even doing it as you walk past them
anything strange goin on with them, change the ntc … its a common part …. c00083195 (?) its the same ntc as the wash ntc, so its an easy job to just plug one in to see if the fault cures
good luck!
- You must be logged in to reply to this topic.