- This topic has 3 replies, 3 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Hi,
This is driving me mad; over 4 hrs logged trying to solve this.
Inlet/Outlet LED reported flashing. Air trap chamber in sump clogged/cleared. Machine takes water in on initial fill only, drains, and then no intake ever again. Changed out the level control switch off circulation pump; initial fill ok, then subsequent fill attempts meet with no success; disconnect and reconnect level control switch, initial fill ok, wash and drain ok, then as before, no water intake on interim rinse. Valves testing ok, supply ok, drain ok.
Has anyone come across this before? Am I missing something? I don’t want to say “electronic” fault and effectively condemn the machine.
Thanks,
Conor!Re: Miele G7761
As it got a flow meter in the matrix chamber? I have had them in the past where its sticking or loose and it has thrown up the same inlet/drain light flashing.
Just a thought.
Phil
Re: Miele G7761
no flow meter in these machines…..
did it heat up when it washed???…as sometimes you have to increase the inlet time from timed to level sensing… its quite common on the older machines as the valves get a bit tired…its also worth checking there is no water in the pressure switch on the btotom left hand side ,as this affects the readings when the machine drains
- You must be logged in to reply to this topic.