Miele Washing machine

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Miele Washing machine

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • December 21, 2010 at 10:49 am #59720
    valgee
    Participant

    The outlet pipe of my Miele washing machine froze up so when I used it, it wouldn’t empty. Although we’ve de-iced it and the machine is now empty, it is still flashing a fault code and doesn’t work. Any ideas, please.

    December 21, 2010 at 11:44 am #339384
    Martin
    Participant

    Re: Miele Washing machine

    What’s the model number? 😕

    December 21, 2010 at 12:08 pm #339385
    valgee
    Participant

    Re: Miele Washing machine

    Hi, It’s a Miele Honeycomb Care, model no. is W3444. 2 lights on the front are flashing – Check drain and Check inlet. Thanks. 🙂

    December 21, 2010 at 12:22 pm #339386
    Martin
    Participant

    Re: Miele Washing machine

    Anti-flood device in the base has been activated. (Probably water trapped on the baseplate which is holding the float switch closed?) Try tilting the machine backwards slightly to allow the water to drain off.:idea:

    Power off and unplugged first mind you!:zap:

    December 21, 2010 at 5:09 pm #339387
    Lbutler
    Participant

    Re: Miele Washing machine

    Hi not used site before so hope im not breaking any rules posting under this 😳 . I have exactly the same problem after outlet froze but with ariston margerhita 2000. Have stripped out all drain system and still no good was suspecting pressure switch as pump is working fine and pumps out if I manually fill but then alarms while in drain phase. Will this model have same anti-flood device?

    Thanks Lee

    December 21, 2010 at 5:22 pm #339388
    Martin
    Participant

    Re: Miele Washing machine

    Lbutler wrote:Will this model have same anti-flood device?

    No way Lee sorry, different beast altogether.

    December 21, 2010 at 5:28 pm #339389
    Lbutler
    Participant

    Re: Miele Washing machine

    Cheers Martin any ideas? Fault is dial spinning error 10, I have stripped out all drain system and fine. Tried all the power off/on reset options. If I manually fill drum and switch on, the pump does drain fine but alarm still comes on. Is the pressure switch at fault? Cheers

    December 21, 2010 at 9:08 pm #339390
    valgee
    Participant

    Re: Miele Washing machine

    I followed your advice, Martin and the machine is now working. Many thanks.

    September 13, 2012 at 2:52 pm #339391
    RHFValentine
    Participant

    Re: Miele Washing machine

    Does anyone know how to reset Miele W/Machines to factory settings? Some cycles don’t spin out effectively – washing still wet – Model W2104

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.