- This topic has 5 replies, 3 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Compaint is check water light on. I think Fault 08 may have been showing in display.
Machine is actually overfilling.
Suspected blocked / gunged up water inlet system or pressure chamber. Could this be the cause ❓Problem is I could’nt get the lid off ❗ To remove side panel
Can’t see any screws , how is it held on ❓
All tips welcome.Thanks
Re: Bosch Dishwasher SGS46E26GB/01
alfie wrote:Suspected blocked / gunged up water inlet system or pressure chamber. Could this be the cause ❓
Could be but also more likely to be the impellor jug (424099)
alfie wrote:Problem is I could’nt get the lid off ❗ To remove side panel
Can’t see any screws , how is it held on ❓2 lugs at the back need to be lifted up whilst you tap the lid toward the back. Once clear of the lug latch it just lifts off!
Re: Bosch Dishwasher SGS46E26GB/01
Thanks Martin, taking the lid off sounds like a three handed job 🙁
I f there are no signs of muck is there a test I could do on the impellor jug or is it a case of changing it and see what happens ❓99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’ll be as Martin said – Impellor jug . Does it get into a constant fill/drain/fill/drain cycle from start ?
To replace , you’ll need LHS panel off to remove fill hose from matrix and then popping out the fill valve from the back to feed out the hose/impellor jug .
- You must be logged in to reply to this topic.