Neff S5443 dishwasher

I ldid one of these pumps a few months ago and the trick is you have rotate the pump and seal in such a way that it then goes into the position it needs to go l have several goes at getting it right…also l did not take cabinet off l just undid the said tork screws and gently lifted the cabinet away from base then removed pump Pigs ear job but once the rotation is correct it all should go back hunky dory Please note that tork can be spelled torq but l use it how it comes to my brain l am always getting told off bout my spellings and grammer on these blogs.. By the way hav’nt done another pump since If it needs a new pump Bosch Neff Siemens prices usually write it off Hope this info is usefull….

Re: Neff S5443 dishwasher

Martin wrote:

Johnokent wrote:
and changed the impellor and seal

Huh? 😕

How can you change the impellor as it comes as a magnetic pump assembly?

Removing of which only requires releasing the latch, twisting clockwise 15 degrees and pulling away. A simple push-twist anti-clock to latch to refit.

He may be referring to the wash MOTOR Martin , rather than the drain PUMP.

If its the drain pump then its a pretty easy twist fit .#

If its the wash motor , its a little bit more difficult but you have to make sure the motor is full pushed home before twisting . There is a cut-out/lug at approx the 4 o’clock setting that is the ‘key’ to lining it all up !