Cooking Time Knob

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Cooking Time Knob

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 28, 2010 at 8:40 pm #59824
    plumb12
    Participant

    Hi all.
    The cooking time knob on my builtin oven is just spinning and not the turns the brass lever underneath it. I can get the oven working by using pliers to turn it.
    It is the center knob. Whirlpool G2P61F/01SR/W, the knob is spring loaded. I think i can see what the problem is, I think there should be a small metal sleave on the flat bit of the knob, this is missing????

    I have tried googling the oven number, but cant seem to find the part, the oven is about 2-3 yrs old, will whirlpool send me this part???


    Thanks for taking the time to read this, and any help would be great.

    December 28, 2010 at 9:27 pm #339751
    kwatt
    Keymaster

    Have you got the 12NC number off the rating plate?

    K.

    December 29, 2010 at 9:50 am #339752
    plumb12
    Participant

    kwatt wrote:Have you got the 12NC number off the rating plate?

    K.

    Thanks for the reply, where will the rating plate be?? the number i gave before was just of the booklet i had.

    December 29, 2010 at 10:20 am #339753
    kwatt
    Keymaster

    Yeah the instruction manual is never a good source for model info as they tend to be generic. 😉

    The rating plate should be inside the oven door somewhere.

    K.

    December 29, 2010 at 8:49 pm #339754
    plumb12
    Participant

    kwatt wrote:Yeah the instruction manual is never a good source for model info as they tend to be generic. 😉

    The rating plate should be inside the oven door somewhere.

    K.

    I can see, type FCEM6 Model g2p61f/01sr/wh

    and what looks like a bar code 884188515000

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.