hoover stuck in program

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover stuck in program

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 29, 2010 at 6:07 pm #59845
    garn
    Participant

    Hi Just Been Out On A hoover160E The Pump Chamber Was Fowled Up With metal And Plastic There Was Also A Piece OF Polythene in The Sump Hose.
    Fitted A New Pump.Switched On A test.
    But I cant get it To Spin or Pump Separately.

    The Machine Seems To Be Stuck On A 60Minute Cycle It Fills And Is Washing.
    Any Ideas Will The Program Clear It Self After An Hour ❓

    Garn 😕

    December 29, 2010 at 7:04 pm #339824
    timdowning
    Participant

    Re: hoover stuck in program

    To cancel any programme you have to hold the start button until all the lights flash and then a bit more until the end light appears.

    You can then turn it to OFF. Then select whatever you want after that.

    December 29, 2010 at 8:13 pm #339825
    garn
    Participant

    Re: hoover stuck in program

    timdowning wrote:To cancel any programme you have to hold the start button until all the lights flash and then a bit more until the end light appears.

    You can then turn it to OFF. Then select whatever you want after that.

    Its On A Test Wash :rolls:

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.