Indesit..CESET carbons

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Indesit..CESET carbons

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 3, 2011 at 10:24 pm #59905
    iadom
    Moderator

    Anyone have a part number for the brushes?
    Ceset carbons

    January 4, 2011 at 8:11 am #340047
    Martin
    Participant

    Re: Indesit..CESET carbons

    CAR52 Jim.

    January 4, 2011 at 10:40 am #340048
    iadom
    Moderator

    Re: Indesit..CESET carbons

    CAR52 has the 4.6mm terminal, these are 6.3mm.

    January 4, 2011 at 1:40 pm #340049
    Martin
    Participant

    Re: Indesit..CESET carbons

    Oh no it hasn’t Jim it’s 6.3mm my friend, trust me. 8)

    January 4, 2011 at 5:24 pm #340050
    iadom
    Moderator

    Re: Indesit..CESET carbons

    Not according to page 8 of the glossy Qualtex carbon brush catalogue. 😕

    January 5, 2011 at 12:38 am #340051
    leavemetogetonwithit
    Participant

    Re: Indesit..CESET carbons

    I think that’s a misprint. I’ve got an old copy of that and it says 6.3mm.
    If the worse came to the worst, you could always crimp 1/4″ tags on the wires.
    Happy New Year to you both.
    Mike.

    January 5, 2011 at 8:06 am #340052
    Martin
    Participant

    Re: Indesit..CESET carbons

    iadom wrote:Not according to page 8 of the glossy Qualtex carbon brush catalogue. 😕

    Oh Jim, Jim, Jim is your middle name Thomas by the way? That you should doubt my word? And go to all the trouble of getting a missprinted old Qualtex catalogue out..? 🙁

    CAR52 is what you need matey….!

    January 5, 2011 at 11:04 am #340053
    iadom
    Moderator

    Re: Indesit..CESET carbons

    I don’t carry them as a spare so can only go on what I see in front of me. 😉

    I have usually replaced the tags or filed the brush angle when confronted with this problem. 🙂

    It was a question from the public side, now sorted.

    January 5, 2011 at 1:18 pm #340054
    Martin
    Participant

    Re: Indesit..CESET carbons

    iadom wrote:It was a question from the public side, now sorted.

    Oh what a relief, I can rest easy now.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.