- This topic has 1 reply, 2 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Indesit WD12 problem.
As soon as you turn on the machine and put it to the reset point, the dial starts to turn continuouslly after about 5 seconds.
The light continually flashes (there are no pauses).
If you quickly turn the dial to any programme the programme starts no problem, but the dial continues to turn?
Any help would be most welcome.
Re: Indesit WD12 problem
Hi
1. Reading the error code
The fault on the appliance is signalled via:
1. the continuous rotation of the selector knob
2. the action, for the first 4′, of the electrovalve and the drain pump
3. the door becomes unlocked
4. the led flashes:
the number of flashes indicates the fault code; the code should be read as follows:
· each fast flash (2/3 flashes of the led very close together) represents one code value
· the fault code is evaluated by counting the number of flashes occurring at 3/4″ intervals from one another
· stop counting when the washing machine waits the equivalent of approximately 8/9″ between flashes
· the procedure is repeated by the appliance cyclically
- You must be logged in to reply to this topic.