Hoover dishwasher no heat?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover dishwasher no heat?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 5, 2011 at 11:10 am #59950
    iadom
    Moderator

    Model HED6612, it looks suspiciously like an Indesit made machine. 😥
    First one of these I have encountered.

    Three lights on front which manual says is a heater problem. Tube element checks out OK so is it likely to be the other standard Indesit fault, ie the PCB?

    Jim.

    January 5, 2011 at 5:23 pm #340192
    iadom
    Moderator

    Re: Hoover dishwasher no heat?

    Anyone??

    Also any idea where this is made, no sign of country of manufacture on the machine?

    Jim.

    January 5, 2011 at 5:58 pm #340193
    Martin
    Participant

    Re: Hoover dishwasher no heat?

    It’s Jim again! No thanks on sorting the CAR52 issue but hey! 8)

    NTC fault and if that checks out then it is indeed the PCB. And I think it’s made in Hoover’s former Zerowatt factory in Italy?

    All the best! 😀

    January 5, 2011 at 6:37 pm #340194
    iadom
    Moderator

    Re: Hoover dishwasher no heat?

    Interesting, it looks exactly like an Indesit machine, right down to the plastic kickstrip, triangular filter, baseplate and all of the innards, its absolutely identical. 😕

    The last but one Hoover dishwasher I did was product of the PRC.

    I somehow think this one will be BER if it is the PCB. 😥

    Thanks. 🙂

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.