Hotpoint fdw60p fault codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint fdw60p fault codes

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 5, 2011 at 1:40 pm #59954
    admin
    Keymaster

    Lights 4 & 6 flash indicating heater problem, element was open circuit.
    this was changed and at the end of the cycle the lights flashed up again.
    we plugged in a pcb to test and the same fault code accured.

    Any ideas please

    Thanks

    Simon

    January 5, 2011 at 1:51 pm #340207
    don
    Moderator

    Re: Hotpoint fdw60p fault codes

    Hi Simon

    This from the Known error codes thread may help.

    Don

    January 17, 2011 at 7:53 am #340208
    admin
    Keymaster

    HI Don, we have changed the heater and the board and all connections are ok, so we are at a bit of loss, any ideas where we go from here anyone?

    January 17, 2011 at 9:52 am #340209
    iadom
    Moderator

    Re: Hotpoint fdw60p fault codes

    Two different PCB’s.

    Before serial No: 41011.0000 its a C00143207.
    After serial No: 41011.0001 its a C00143209.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.