AW23 twisted tub.

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › AW23 twisted tub.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 13, 2011 at 9:17 pm #60185
    megawatt
    Participant

    I have seen a few with a slight twist in but nothing to worry about. Today I went out to a seven month old machine that has got a bad twist. Moving the tub back and forth has no effect.
    Has any one had the same problem? The legs feel ok so I presume the best corse of action is to replace all the rubbers. Any experience gratefully received.
    Mike.

    January 13, 2011 at 10:25 pm #341038
    johnmac11
    Participant

    Re: AW23 twisted tub.

    An earlier post in this forum revealsTHIS

    John

    January 15, 2011 at 10:53 am #341039
    megawatt
    Participant

    Re: AW23 twisted tub.

    Thanks for the link John. I have read it and all my later machines have been modified by cutting the tub rim, protecting the hose by fixing extra rubber to it and moving the tub forward. On the machine in question the twist is not removed when you allow the tub to come forward.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.