Zanussi ZWF14070W1 ntc

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Zanussi ZWF14070W1 ntc

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 20, 2011 at 11:22 am #60352
    nelson
    Participant

    Does anyone know where I can get the ntc for the above machine, connect only seem to supply it with the heater.

    January 21, 2011 at 1:51 am #341882
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF14070W1 ntc

    Not listed seperately on Lux site, though nine diff. pnc s for your model, I only checked one. Don’t think you can get it on its own. Probably easiest just pay the price unless someone offers one from a scrapper. Are you sure the old ones done for? Never had a problem with one myself.
    Mike.

    January 21, 2011 at 4:57 pm #341883
    nelson
    Participant

    Re: Zanussi ZWF14070W1 ntc

    I am not absolutely sure to be honest Mike, out of all the parts on the machine that I could test the ntc was the only one with a slightly dodgy reading (that said my probes are not great on those tiny contacts).
    If I could have bought the ntc seperate I would have been able to plug it in and either sort the fault or point the blame at the board.

    January 21, 2011 at 8:31 pm #341884
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF14070W1 ntc

    I know what you mean. I’ve ordered one of these from Hong Kong:
    useful looking tool
    Could take weeks to get here though.
    Mike.

    January 22, 2011 at 10:12 am #341885
    nelson
    Participant

    Re: Zanussi ZWF14070W1 ntc

    That’s a good spot Mike, I’ve just ordered one 😀

    January 22, 2011 at 11:27 am #341886
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF14070W1 ntc

    Yeah, I’m hoping that tool will help me de-clutter my test leads pouch a bit. It’s choc a bloc at the moment with various terminals and rast plugs connected to wires which I can get my croc clips onto. When I need something, I usually can’t find it without tipping the whole lot out on the floor.
    Mike.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.