Siemens WT46E388GB/05 FD8708 200376

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WT46E388GB/05 FD8708 200376

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 24, 2011 at 7:32 pm #60481
    geoffmackay
    Participant

    Condenser drier

    Just been brought into workshop this afternoon with empty water and clean filter lights on. No water in drawer and filters / condenser clean.

    Any ideas chaps?

    Geoff

    January 24, 2011 at 8:05 pm #342385
    Allsorts
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    Is it in this state when the unit is operating?

    George

    January 24, 2011 at 8:06 pm #342386
    geoffmackay
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    Wont run at all George

    Geoff

    January 25, 2011 at 8:11 am #342387
    Martin
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    geoffmackay wrote:Any ideas chaps?

    I guess you must have looked at the pump chamber and float by now?

    January 25, 2011 at 5:26 pm #342388
    geoffmackay
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    Hi, yes cleaned pump chamber etc. Runs for about 20mins then faults. Empty tank light flashes. Was incorrect about not starting at all.
    Another competitor whilst visiting workshop thinks it is flashing an error code but machine has a digital screen and surely would be displayed in that? The light does flash constantly and does not stop as it would as in error.

    Geoff

    January 25, 2011 at 8:00 pm #342389
    gandh1
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    is there no 5yr p&l warranty cover on this ???

    January 25, 2011 at 8:11 pm #342390
    geoffmackay
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    Commercial premises.

    Any BSH engineers out there?

    Geoff

    January 26, 2011 at 8:50 am #342391
    Martin
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    I take it you’re testing this machine with a load (say) of damp towels? No doubt you are aware it would not operate without, but just checking.:wink:

    So, if the water container were empty at the start then after 20mins or so of tumbling and heat, there would be some water in the container by then…is there?

    If you pour a litre or so of water down the overflow drain pipe in the water tank tray and switch on, will it pump back up OK?

    Is the float switch sticking?

    January 26, 2011 at 5:45 pm #342392
    geoffmackay
    Participant

    Re: Siemens WT46E388GB/05 FD8708 200376

    Fitted a replacement pump today and all is now fine.

    Thanks to all who replied.

    Geoff

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.