Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 3, 2011 at 7:49 pm #60766
    fatcat40s
    Participant

    Hi All,

    I thought Id got this licked but no, it seems the metal clips in the flowmeter pcb connector have lost their spring, I can bend the connectors and its fine for 5 days or so and then the connector losses its grip and then we have f7 again.

    First option is to fine a new connector cable that runs from the flowmeter to the control board of secondly and a bit of a bodge is to remove the connector and solder the wires directly to the PCB.

    What are your thoughts??

    Regards


    John

    February 3, 2011 at 8:38 pm #343539
    Specialist01269
    Participant

    Re: Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

    Before going down the replace harness or soldering wires on to the PCB have you tried somewhere like Maplin for a suitable replacement connector?

    February 3, 2011 at 10:41 pm #343540
    fatcat40s
    Participant

    Re: Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

    Ive tried maplins, no joy.

    I did ponder about using conductive glue but that depends on the voltage as its only suitable for low voltage use.

    Regards


    John

    February 3, 2011 at 11:34 pm #343541
    multibrand-man
    Participant

    Re: Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

    I think I have a integrated Whirlpool sitting buried in the garage if you want I can remove the above mentioned part of the harness and post it to you if thats any good

    February 4, 2011 at 12:41 pm #343542
    fatcat40s
    Participant

    Re: Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

    That would be fantastic, how much would you want??

    Regards


    John

    February 4, 2011 at 2:40 pm #343543
    multibrand-man
    Participant

    Re: Whirlpool ADP 5962 F7 PCB Connector faulty can I solder

    just pay the postage the dishwasher actually has a faulty circulation pump so I only kept it for spares send me a private message with your address deatils and I will sort it out over the weekend

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.