miele w919

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele w919

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 7, 2011 at 6:41 pm #60855
    domesticbliss
    Participant

    Hi, machine goes through the spin cycle when selected then the `main wash` light flashes. the spin cycle finishes and all water is pumped away..new one on me.
    Any ideas would be most welcome.
    Many thanks
    Paul

    February 9, 2011 at 12:31 am #343902
    washermanuk
    Participant

    Re: miele w919

    If my memory serves me possible heating problem?
    Check HEATER,RELAY and NTC!
    hope this helps BRIAN

    February 11, 2011 at 10:40 am #343903
    domesticbliss
    Participant

    Re: miele w919

    Hi Brian, checked heater..ok, ntc and wiring back to the el 101..all ok.
    Anything else spring to mind before I contemplate either replacing the module bd or scrapping the machine?
    regards
    Paul

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.