bosch wvti2840gb/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch wvti2840gb/04

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 7, 2011 at 10:08 pm #60866
    HotDog
    Participant

    Went this washer dryer today customer complaint clothes not drying no matter how long its on the fan and heater are ok the hot air is blowing into drum ok but there does not sound like any water going in to condenser i cannot find a supply to any valve it washes and spins ok am i missing something

    February 8, 2011 at 6:13 pm #343937
    HotDog
    Participant

    Re: bosch wvti2840gb/04

    I would just like to know if this is a common fault could it be a board fault its not a model i have worked on before this job has come through a letting company that has all hotpoint machines which i am more at home with and they pay on time so i need sort it any bsh stars out there thanks

    February 9, 2011 at 10:43 pm #343938
    iadom
    Moderator

    Re: bosch wvti2840gb/04

    A friendly thread bump for an old mate of mine. 😀

    Hope you get some answers Cliff.

    Jim.

    February 9, 2011 at 11:23 pm #343939
    RocketMan
    Participant

    Re: bosch wvti2840gb/04

    On the drying side of tripple vavle. Just make sure water is getting through – remove hose from the valve to top of drum/condenser and switch on – make sure water is coming through. It could be a blocked valve (if I remember rightly they have an insert on the vavle outlet ) that restricts the flow. The restricters get blocked or fall out. I think it turns it into a spray to aid cooling and condensing.

    hth Steve

    February 10, 2011 at 5:56 pm #343940
    HotDog
    Participant

    Re: bosch wvti2840gb/04

    got you Jim understand what your saying thank for the info rocketman just didnt get any live feed to valve while on dry thats what confused me should there be a perminant live to valve .Round two 8am fri

    February 11, 2011 at 4:45 pm #343941
    HotDog
    Participant

    Re: bosch wvti2840gb/04

    Sorted turned out to be solonid valve it takes about 5min before the valve gets alive feed and if you pause the prog it its same again should have waited longer on first visit

    February 14, 2011 at 5:41 pm #343942
    robbo1973
    Participant

    Re: bosch wvti2840gb/04

    i have the same fault as you hotdog and i too didnt wait 5 mins and have no neutral to valve,when you say valve was it o/c as mine is closed or was it a restriction problem?

    cheers chris

    February 14, 2011 at 9:10 pm #343943
    HotDog
    Participant

    Re: bosch wvti2840gb/04

    It was o/c valve didnt see restrictor i just changed coil

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.