Miele model G663 SC V-I : loud bangs and acrid smell

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Miele model G663 SC V-I : loud bangs and acrid smell

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #60916
    pj500
    Participant

    Hi, my 11 year old Miele made some loud banging noises while running and I could smell a faint acrid smell. I stopped it and checked inside – there were no obstructions. I checked the filters for blockages etc – all was fine. I then tried to start it again and it runs for just a few seconds before stopping. When I open the door, now there is a red flashing light next to ‘inlet/outlet’. According to the manual if the machine stops just after turning it on with this flashing light it means the stop-cock is shut, but it is not.

    Does anyone know what has gone wrong? And what sort of cost it might be to get an engineer to fix this type of problem?

    As the machine is 11 years old, would I be better off getting a new one? Perhaps Bosch as they are better value than Miele.

    Thanks for any help.

    pj

    #344127
    Specialist01269
    Participant

    Re: Miele model G663 SC V-I : loud bangs and acrid smell

    Hi: Rather than the expense of a new machine, why not try the repairs@ feature for an Engineer local to you? it could save you quite a bit of money.

    #344128
    Seamy
    Participant

    Re: Miele model G663 SC V-I : loud bangs and acrid smell

    Sounds like a motor problem, likely a leak into base also.

    #344129
    keithwilliams
    Participant

    Re: Miele model G663 SC V-I : loud bangs and acrid smell

    sounds like the mains suppressor to me. a dead easy and relativly cheap repair. (don’t buy part from miele). if you don’t know what i mean then get you local guy to do job.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.