Hotpoint FDW 20 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDW 20 Dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 9, 2011 at 3:44 pm #60918
    Kielykid64
    Participant

    Hi Guys, Can anyone tell me why the motor is pulsing ? It starts off emptying , Fills Goes to wash and starts to heat but all the time it won’t keep the was motor running . Every 2 or 1.5 mins it stops . The Lady couldn’t tell me if any of the 4 Green lights were flashing.
    The most common fault I find with this machine is the center spray-arm spindle comes loose and leaks in the sump . little sealant and a squeeze and Job done.
    Help Please. Maurice.

    February 9, 2011 at 8:35 pm #344132
    HotDog
    Participant

    Re: Hotpoint FDW 20 Dishwasher

    sounds like overload in motor tripping out have look for leak from motor

    February 13, 2011 at 7:44 pm #344133
    Kielykid64
    Participant

    Re: Hotpoint FDW 20 Dishwasher

    I think you are correct , I think the motor was the problem . I didn’t see it before but the motor was very warm after a few mins , So thanks again for your help !
    Maurice.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.