tricity bendix aw1201 not taking water

This topic has 6 replies, 4 voices, and was last updated 15 years, 2 months ago by slyp98.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
February 9, 2011 at 10:44 pm #60935

slyp98
Participant

hi guys , this washing m/c wont open the solenoids , i’t starts to pump water out then just stops , ive checked the connectors to the solenoids and got 3.4 v output from the control board , does this mean dead board ? does anyone have diagnostic procedure/ technical sheets for one of these thanks

February 9, 2011 at 10:46 pm #344201

iadom
Moderator

Re: tricity bendix aw1201 not taking water

Its always a good idea to include the full Pnc number on Lux group queries. 😉

February 9, 2011 at 11:10 pm #344202

slyp98
Participant

Re: tricity bendix aw1201 not taking water

cheers iadom ,pnc = 914780758/00 , 20050318

February 10, 2011 at 12:47 am #344203

leavemetogetonwithit
Participant

Re: tricity bendix aw1201 not taking water

Usual checks first. Condensation on brush holders or low insulation somewhere. Tech stuff should be available from Connect mediator.
Mike.

February 10, 2011 at 9:40 am #344204

slyp98
Participant

Re: tricity bendix aw1201 not taking water

do you mean connect .net the group which distribute electrupart and avix spares ? , do you need to register with them as an independant?

February 10, 2011 at 12:05 pm #344205

Martin
Participant

Re: tricity bendix aw1201 not taking water

slyp98 wrote:do you mean connect .net the group which distribute electrupart and avix spares ? , do you need to register with them as an independant?

Yes and yes!

But I’ve emailed you some info anyway….. 8)

February 10, 2011 at 7:01 pm #344206

slyp98
Participant

Re: tricity bendix aw1201 not taking water

that worked alright , amazing what a little moisture and carbon dust can do to an electrical system !!cheers one and all
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.