Bosch SGS43T58GB/21 Overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS43T58GB/21 Overfilling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 14, 2011 at 10:58 am #61020
    Toni
    Participant

    Hi
    This one overfills until the safety float kicks in
    Not sure how this one controls the water level
    I cant find a pressure switch or float inside etc
    any help would be much appreciated

    Toni

    February 14, 2011 at 12:44 pm #344609
    Martin
    Participant

    Re: Bosch SGS43T58GB/21 Overfilling

    Classic case yet again of a duff Impellor Jug (424099).:wink:

    February 14, 2011 at 12:45 pm #344610
    bzz67
    Participant

    Re: Bosch SGS43T58GB/21 Overfilling

    this machine probably has a flow meter (impellor jug) down near the inlet valve. it measures the water intake using a small impellor with a magnet on it whitch passes a reed switch. the pulses are counted by the pcb.
    Is it actually overfilling or is the safety switch just operating early, usually due to the front sump hose being chocked with sludge.
    hope this helps

    February 14, 2011 at 1:36 pm #344611
    Toni
    Participant

    Re: Bosch SGS43T58GB/21 Overfilling

    Thanks for that
    it’s overfilling to point of almost coming out of the door

    Toni

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.