Hotpoint wdl540 lights flash + drain.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint wdl540 lights flash + drain.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 16, 2011 at 6:01 pm #61110
    bubs
    Participant

    Hi,
    Hope im not covering old ground, this machine fills and washes for a few mins before pumping out and flashing all the horizontal option lights. Not the random flashing of our c17 cap failure.

    I have had a general look over, cannot see anything obvious, pulled the ntc wires to check for a broken one.

    Is this a new fault code or pcb failure?

    Thanks for any help,
    Graeme

    February 16, 2011 at 7:00 pm #344883
    neilsukwg
    Participant

    Re: Hotpoint wdl540 lights flash + drain.

    Had one the same a month ago, which reminds me, need to send invoice!

    Tried all the usual suspects and found nothing, but removing all edge conectors to ensure a good fit seems to have cured it.

    Thats why i didnt ask for immediate paymeny as per my usual terms. I wanted to make sure the machine worked ok for a week before charging.

    February 16, 2011 at 9:59 pm #344884
    bubs
    Participant

    Re: Hotpoint wdl540 lights flash + drain.

    Thanks Neil, already unplugged everything so it didn’t work this time
    Graeme

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.