rosieres 2040 range cooker

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts rosieres 2040 range cooker

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #61148
    kwaremont
    Participant

    Hi were will i get some oven door hinges for this oven thanks.

    #345008
    whiskey_six
    Participant

    Re: rosieres 2040 range cooker

    Made by Candy, could do with product numbers to confirm parts but if it’s the single built in oven (FR2040) with a product number 36279016 then the part number for the door hinge from GIAS is 91750365.
    Part is still available, cooker started production circa 2000

    Ignore me, see below

    #345009
    whiskey_six
    Participant

    Re: rosieres 2040 range cooker

    Sorry, just noticed that you said Range, could do with the product number to help as when you type 2040 in Giastech there are loads. Do have a pdf file that I could send if you have an email but it’s in Italian
    The model is a 2040cDB-dDB Range cooker made between 1/6/88 to 22/3/93.
    I go to one in North Wales in Bala which is LPG and you can still get most parts

    #345010
    admin
    Keymaster

    Re: rosieres 2040 range cooker

    [quote were will i get some oven door hinges for this oven thanks.


    Hi

    There are only 2 types of hinges for the 2040 range.

    Is there 2 screws off set from each other approx. 6″ apart vertically on each side of the inner door at the bottom ?.

    If you open the oven door approx. 6″ where it stays open can you lift the door upwards out of the hinge slots…. DONT PULL AWAY FROM THE COOKER THEY SHOULD JUST SLIP UPWARDS ?.

    The newer ones with screws we keep in stock.

    Bryan

    service@ffrservices.co.uk

    #345011
    kwaremont
    Participant

    Re: rosieres 2040 range cooker

    thanks for the info they are the hinges that you can slide the door off could be 25 years old

    #345012
    admin
    Keymaster

    Re: rosieres 2040 range cooker

    Hi

    Those hinges are obsolete…sorry

    Bryan

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.