AW23 Counterweight Bolts

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › AW23 Counterweight Bolts

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 21, 2011 at 7:14 pm #61210
    mike100
    Participant

    Does anyone know if it is possible to get bolts the same size but with say a 10mm head. The 8mm are useless and very difficult to tighten.

    Mike

    February 21, 2011 at 10:59 pm #345301
    aqualectric
    Participant

    Re: AW23 Counterweight Bolts

    Zanussi Nexus and later (plastic tubs) motor mount bolts fit – just put a couple of washers under the head to match the length of the weight bolt. (they are slightly longer). The washers have to be able to fit easily into the concrete weight sockets; ie:- same washer size as the originals.
    Carry a few now as replacements – they are almost twice as thick with an 8mm head……. 😉
    No recalls so far……….8)

    Steve.

    February 23, 2011 at 9:45 pm #345302
    mike100
    Participant

    Re: AW23 Counterweight Bolts

    Thanks Steve,

    Good suggestion.

    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.