Hotpoint FDL570X fault code not reset

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDL570X fault code not reset

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 22, 2011 at 4:15 pm #61236
    bubs
    Participant

    Hi,

    went to this new type d/w Hotoint FDL570X s/n 902100057 .The Machine was flashing the wash + rinse-aid + salt lights. Tipped the water out the bottom and it reset, filling again. Found the drain hose was away from the pump so i stuck it back in place (push fit)

    Now it will not reset and fill again, tried leaving it off for 10 min, holding the on/off or start buttons down, the fault is stuck even though the float swich has reset.

    Any ideas clever people?
    Graeme

    March 1, 2011 at 2:32 pm #345393
    bubs
    Participant

    Re: Hotpoint FDL570X fault code not reset

    An update!

    Went back and found the bottom edge connector on the pcb had come loose.
    This is in circuit with the overflow float, so it worked ok once back on.

    Cheers
    Graeme

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.