Baumatic BW13 – How to access pump

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Baumatic BW13 – How to access pump

Viewing 1 post (of 1 total)
  • Author
    Posts
  • February 24, 2011 at 6:09 pm #61286
    otherwayup
    Participant

    Hi, I think I need to fix/wedge open/closed the valve on the recirc .pump as only the top arm rotates, but I don’t know how to access the pump.

    Which panel do I need to remove etc to get to pump?
    ========
    Don’t worry, done it. Removed side panels, then the bottom panel.

    Removed solendoid off pump. A plastic diverter flap had snapped off, blocking the lower arm port. Remove flap (discarded) and put it all back together (won’t be able to run half load anymore)

    Now both arms rotate again. Yipee (£300 quid for a new dishwasher saved)

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.