Hoover Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 24, 2011 at 8:36 pm #61298
    robbra
    Participant

    HD312-80
    intermittently it gets half way in the fill then the fill starts to pulse and will nearly overfill but the pump comes on. Sometimes it will wash ok.
    Pressure switches seem fine no water in the tubes.
    Any pointers welcome.
    Rob
    PS. Where is the heater?

    February 25, 2011 at 9:14 am #345594
    loopey
    Participant

    Re: Hoover Dishwasher

    the heater is on the back wall 🙂 pressure switch i would be looking at . also check connection on pcb and for dry joints 🙂

    February 25, 2011 at 6:00 pm #345595
    robbra
    Participant

    Re: Hoover Dishwasher

    Thanks loopey.
    Any idea which, red hose or clear?
    Two other points after another look.
    Heater seems to be o/c but will check again…would this cause this?
    Water coming into the tub is salty and when it tries to cycle bubbles come from the hole in the bottom of the sump so could the water softener be faulty?
    Rob

    March 2, 2011 at 7:56 am #345596
    robbra
    Participant

    Re: Hoover Dishwasher

    Anyone got an opinion on the water softener?
    Rob

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.