Bosch vented dryer. Is it a fault code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch vented dryer. Is it a fault code

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 5, 2011 at 5:26 pm #61482
    cornwell40
    Participant

    Customer just rang with a Bosch WTV74103gb/07 showing flashing filter light
    during the sensor dry. Presuming at the mo. that it’s a venting problem as she’s adamant (Hah! Goody Two shoes 😉 ) that the filter is cleared every time its used. Then again is it a fault code and nothing to do with the filter. You never know nowadays 😕


    Tony

    PS For those too old or too young, the reference to Adam Ant was an 80’s star, of moderate to no talent, who made took of money dressed up as a highwayman. A little like George Osborne is today, but he doesn’t bother to dress up.

    March 6, 2011 at 9:07 am #346340
    Martin
    Participant

    Re: Bosch vented dryer. Is it a fault code

    These sensor dryers are prone to erratic front NTC readings so worth checking the NTC of course. Also won’t operate in a cold room below 5 celsius. And finally, check for fluff build-up in the immediate area of the heater box.:wink:

    March 6, 2011 at 6:19 pm #346341
    cornwell40
    Participant

    Re: Bosch vented dryer. Is it a fault code

    Cheers Martin. Funnily enough she mentioned it’s in the garage and has been playing up since the cold weather last year.


    Tony

    March 6, 2011 at 6:32 pm #346342
    Martin
    Participant

    Re: Bosch vented dryer. Is it a fault code

    Well there you go! 8)

    March 7, 2011 at 7:45 pm #346343
    PINKY
    Participant

    Re: Bosch vented dryer. Is it a fault code

    Check the ducting / hose / wall outlet. 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time its blocked on the outside of the wall vent!! :rolls:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.