Zanussi Drum Bearings

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi Drum Bearings

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 8, 2011 at 11:39 am #61532
    darleydame
    Participant

    I bought replacement bearing via this site in July and up till the other week the washing machine has been quiet, now it sounds like the bearings have gone again as its very noisy on spinning.
    The bearing on the spider was fine so we just replaced the drum bearings and fitted a new drum seal.
    Is it best to replace the lot or try to grease them up?

    March 8, 2011 at 12:47 pm #346496
    Martin
    Participant

    Re: Zanussi Drum Bearings

    darleydame wrote:Is it best to replace the lot or try to grease them up?

    The former the ideal the latter merely gives you a month or two more between bearing kit replacements. 🙁

    March 8, 2011 at 2:38 pm #346497
    darleydame
    Participant

    Re: Zanussi Drum Bearings

    thank you I thought that might be the case, but if they are going to go every 8 months and the washing machine is over 15 years old I might just get a new one

    March 8, 2011 at 2:41 pm #346498
    Martin
    Participant

    Re: Zanussi Drum Bearings

    darleydame wrote:and the washing machine is over 15 years old I might just get a new one

    Good choice!:tup:

    Tip: Don’t buy a Zanussi replacement. 😥 (Ask Quickwash which one to choose though. :D)

    March 8, 2011 at 3:03 pm #346499
    quickwash
    Participant

    Re: Zanussi Drum Bearings

    💡 If you purchase one of the fantastic ISE10’s on the left of the screen you wont be replacing the bearings for a few years! 😀

    It is a superb machine, by the way, and i dont think you will buy anything better for the money IMHO.

    Best wishes

    quickwash :plug:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.