Neff S5457XOGB/02 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff S5457XOGB/02 Dishwasher

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 9, 2011 at 11:27 am #61560
    Payney
    Participant

    Hi all. Need some help with this dishwasher. It seems to have a fill level problem. If put on a cycle it drains and then shortly after starts to fill but the water level only just fills the sump so when the spray pump motor starts it just trickles out of the spray arms instead of jetting. I have tried to manually put more water in and seems to spray around fine then.
    Is this a common fault with these and if so is it a pressure switch?
    Thanks in advance
    Mark

    March 9, 2011 at 5:58 pm #346589
    nomadPaul
    Participant

    More than likely the pressure chmber/fill hose will be clogged and blocked .

    Left hand side panel off and watch the fill sequence . You’ll probably see the water backing up from either the pressure chamber itself or the ribbed hose between the pressure chamber and sump.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.