Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay led

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay led

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 9, 2011 at 2:39 pm #61569
    Bernie
    Participant

    Stuck on 3h delay led, is there a way to cancel/rest. I can select any program but the machine will not start I guess it’s waiting 3 hours before it will start.
    I have meggered machine also heater both have a good reading.
    Any help suggestion much appreciated
    Bernie

    March 9, 2011 at 8:37 pm #346652
    loopey
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    check you in box stuff sent

    March 10, 2011 at 11:58 am #346653
    Bernie
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Thanks very much loopey for the info.
    I did manage to get rid of the 3h delay by holding down the delay button then switching on, it would then move to 6h if I did it again it moved to 9h and then to off.
    After trying to get into the self-diagnostic sequence so as to see the error code. I now have the led’s of P1 & P2 on and cannot get rid of them, I did get them off but when you switch off & back on again there back.
    I never did get into the diagnostic program, could not get past led’s P1 & P2 on, just on not flashing.
    Would I be right in assuming it’s the PCB, or could it be something else?
    Any suggestion
    Bernie

    March 10, 2011 at 12:48 pm #346654
    Martin
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Bernie wrote:I now have the led’s of P1 & P2 on and cannot get rid of them, I did get them off but when you switch off & back on again there back.

    The P1 & P2 LED’s should be flashing, they show an error code, count the flashes to establish the error.

    March 10, 2011 at 3:24 pm #346655
    Bernie
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Not flashing just on, if I hold P1 down and switch on they go out but if you try to select anything they come back.
    Thanks for the reply Martin
    Bernie

    March 10, 2011 at 4:03 pm #346656
    Martin
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Try holding in P1 then press the I/O button, release the P1 button and then press P1 again twice in succession, see if that clears it?

    March 10, 2011 at 4:37 pm #346657
    Bernie
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Thanks for the suggestion Martin, tried that but it did not work.

    I also tried holding in P1 then switching it on, released the P1 button
    then pressing the P1 4 times in 4 seconds, that did not work either.
    Bernie

    March 10, 2011 at 4:39 pm #346658
    Martin
    Participant

    Re: Hoover Dishwasher HFI3015-80 32900047 stuck on 3h delay

    Hmmmm?…It’s looking like a module fault all the while is’nt it? 🙁

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.