DE6754 , NO HEAT

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DE6754 , NO HEAT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 12, 2011 at 1:11 pm #61628
    servbland
    Participant

    We have a DE6754 , pnc. 911915018/01 dishwasher with a “no heat ” fault . We have checked the element , level and safety switches and wiring which aLL test OK . We are thinking pcb , as this seems to be quite common on Zanussi dishwashers , but other posts on this model with no heat fault suggest that the machine would complete the cycle but without heating . Our machine will complete the cold prewash and stay on the main wash phase without heating . any help would be appreciated. ( There arew no fault codes displaying . )

    March 12, 2011 at 7:25 pm #346995
    Criscold
    Participant

    Re: DE6754 , NO HEAT

    Did you test heater circuit from connections on module and also check solder joints on module around the relay?

    Colin

    March 14, 2011 at 9:42 am #346996
    servbland
    Participant

    Re: DE6754 , NO HEAT

    Thanks for the reply Colin , and yes we have checked the module which looks fine and the heater wiring from module which is o.k.

    March 15, 2011 at 2:02 pm #346997
    servbland
    Participant

    Re: DE6754 , NO HEAT

    New pcb fitted machine now heating happily .(after discovering that the heater connector plug had been left out from our testing of the wires !) 😳

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.