hotpoint wd440 error f4

This topic has 1 reply, 2 voices, and was last updated 15 years ago by JENKS.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
March 16, 2011 at 8:26 pm #61697

JENKS
Participant

called to this washer dryer last week with error f15(dryer heater relay),changed module from emw and that sorted the f15 fault but it then came up with error f4(pressure switch stuck on empty)pump running continuously.checked pressure switch seems ok,checked pipework for blockages seems ok.anyone else had simular problem.

March 17, 2011 at 12:48 am #347264

aqualectric
Participant

Re: hotpoint wd440 error f4

Remove the PCB and tighten all the edge connectors. Also get a new pressure switch – they burn internally for a passtime and at around £6 it’s a cheap fix. I’ve fitted quite a few of them…. 😉

HTH,

Steve.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.