Hotpoint FDW70 circulation pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDW70 circulation pump

  • This topic has 6 replies, 3 voices, and was last updated 15 years ago by AMS.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 17, 2011 at 10:19 pm #61722
    AMS
    Participant

    Hi, I need a circulation pump C00118802 for this machine. Connect and Masterpart are both out of stock. Does anybody know if I could fit one from from the FDW60 part no C00080512 as from the pictures, they look identical apart from some minor wiring differences which could be easily overcome. Also, the C00080512 is in stock and quite a bit cheaper 😀
    Cheers,
    Dave

    March 17, 2011 at 10:41 pm #347368
    iadom
    Moderator

    Re: Hotpoint FDW70 circulation pump

    Possibly not, C00118802 one is listed as 1/2 load V240 75W, the other listed as a motor pump with half load solenoid.

    March 17, 2011 at 11:18 pm #347369
    AMS
    Participant

    Re: Hotpoint FDW70 circulation pump

    Hmmm, ok, it was just an idea. Does look very similar though. So are you saying it runs at 1/2 speed as opposed to just a solenoid valve for 1/2 load?

    March 17, 2011 at 11:42 pm #347370
    iadom
    Moderator

    Re: Hotpoint FDW70 circulation pump

    Thats the info given on Partfinder, it would suggest your observations may be correct but I don’t know for certain.

    Jim.

    March 28, 2011 at 12:07 pm #347371
    AMS
    Participant

    Re: Hotpoint FDW70 circulation pump

    Just to follow up one this one. I did fit the C00118802 and it was identical, including the label on the motor, apart from the electrical plug which was very easy to sort. Hope this might be of help to someone in the future.

    Dave

    March 28, 2011 at 5:41 pm #347372
    washtronics
    Participant

    Re: Hotpoint FDW70 circulation pump

    yes you can fit the alternative motor,just remove the solenoid-it is secured by a push on metal fixing, have done it many times on hotpoint/indesit dishwashers

    March 28, 2011 at 7:48 pm #347373
    AMS
    Participant

    Re: Hotpoint FDW70 circulation pump

    I didn’t need to touch the solenoid. I left it fully functioning as design intended. I have fitted non-half load pumps to models with the half load function, with the consent of the customer, naturally. I just ask them if they use the half load feature, which most of them don’t.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.