- This topic has 4 replies, 2 voices, and was last updated 15 years ago by
.
-
Posts
-
Hi , got a problem with my dishwasher today, let me explain… After running the machine earlier, found a strange smell like a vaguely electrical or TCP disinfectant smell. Dishes were not as hot as usual after running and they were still wet, not dried. Ran machine again later , noticed lots of odd clicking noises at start of cycle , no lights were on , but water was filling. Turned off, emptied water out of the bottom, checked filters (clean), re-ran machine, same problem.Help!
Re: Bosch SGS4442GB/01 problem
pcb burnt out. classic no heat failure and dry joint will be in the middle of the board
some of them can get very very black.
Re: Bosch SGS4442GB/01 problem
Thanks gandh1, I’ve taken the decision to say goodbye to the trusty old bosch having done good service for many years and have ordered its cousin a siemens, good deal at John Lewis.
Re: Bosch SGS4442GB/01 problem
make sure you register the full guarantee in case it comes with a 5yr manufacturers warranty. however dry joint repairs from specialist engineers like emw work out at under £50 inc vat. would be worth ebaying the old machine as spares or repair for 0.01p rather than paying someone to take it away 🙂
- You must be logged in to reply to this topic.