Hotpoint Supermatic Twintub 1464

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint Supermatic Twintub 1464

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • March 21, 2011 at 4:40 pm #61787
    Poppins
    Participant

    Does anyone happen to have a parts diagram for this model?

    Many thanks

    Chris

    March 21, 2011 at 5:01 pm #347619
    iadom
    Moderator

    Re: Hotpoint Supermatic Twintub 1464

    They are on Partfinder but as there are five pages it would be good if you could let me know just what area you are looking at and I could possibly do a screen dump of the correct diagram.

    What is it you need?

    Jim.

    March 21, 2011 at 5:06 pm #347620
    Poppins
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Its the wash side i’m after showing all the seals required from the gearbox up to the agitator please Jim.

    Many thanks
    Chris

    March 21, 2011 at 5:13 pm #347621
    Martin
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    But they’re all obsolete anyway as far as I know. 😯

    March 21, 2011 at 5:29 pm #347622
    iadom
    Moderator

    Re: Hotpoint Supermatic Twintub 1464

    As Martin says, most parts have been obsolete for many years now. 😥

    I can still send you the diagram if you want, you will have to PM me your e-mail address.

    Jim.

    March 21, 2011 at 5:37 pm #347623
    Poppins
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Looking at Connect and Qualtex it seems I can still get some things so I am forever hopefull! 😛 I also have old stock of certain gaskets but I can’t remember what was what it was so long ago!! :rolls:

    Chris

    March 22, 2011 at 8:41 pm #347624
    loopey
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Well theres only 3 important gasgets for the gearbox, 1 , tub seal never had to change 1
    2 is the top hat spring loaded counter face to the spigot and above that is the cork one thats below the nut

    the top hat seal is still availble on connections at wait for it


    £13 lol that will be the culprit iff its leaking i have the part number iff you need it ..

    phil

    March 22, 2011 at 9:59 pm #347625
    Poppins
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    It IS leaking from under the tub but given the rust around the tub seal I assumed it would be this. Do you really think the top hat sprong loaded counter face is the culprit? Presumably if it is then it wouldn’t leak until the water level reaches it whereas the tub seal would leak almost immediately there was water present.
    What part number do you have Phil?

    Chris

    March 22, 2011 at 10:17 pm #347626
    iadom
    Moderator

    Re: Hotpoint Supermatic Twintub 1464

    Seal is a 143098.

    If the rust is around the drum seal then it could well be leaking from there. Although over 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of leaks were from the seal Phil mentions it actually leaked onto the top of the gearbox, right down the centre shaft if the small top hat seal failed, it did not show on the seal under the drum.

    Also if the gearbox shaft had become rusty from previous leaks it could split the Bakelite support tube down the seam.

    March 22, 2011 at 10:31 pm #347627
    Poppins
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Thanks Jim.
    Although it is rusty at the seal I don’t think it has perforated the tub or breached the seal. I suspect it is the seal Phil mentioned. I’m think I might still have one of those in a box hiding!

    March 22, 2011 at 10:43 pm #347628
    Poppins
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Come to think of it though it might be the one for the top loader which is a bit bigger as I recall.

    March 22, 2011 at 10:53 pm #347629
    iadom
    Moderator

    Re: Hotpoint Supermatic Twintub 1464

    They did rust through around the drum support, bear in mind it is donkeys years old. Nothing that some plastic putty couldn’t fix though.

    I would say the top loader top hat seal was approx ten times the size of the twin tub one. 😀

    March 23, 2011 at 10:22 am #347630
    loopey
    Participant

    Re: Hotpoint Supermatic Twintub 1464

    Gearbox spigot tripod/post seal washer t/t 1460 1464 1465 1466 1467 1469 14860 14870 14890 9400 9402 9404 9410 9414 (5031680909098)connections part number now £16.83 new pence

    yes had a few over the years with pin holes in the tub

    phil

    March 23, 2011 at 3:38 pm #347631
    electrofix
    Moderator

    Re: Hotpoint Supermatic Twintub 1464

    seal goes
    check for excessive movemnent in support tube when it wears will leak even if new seal fitted

    not a bad job to fix though done lots of them years ago

    Dave

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.