Siemens oven HB760560B/02

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens oven HB760560B/02

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 23, 2011 at 6:51 pm #61845
    Pigpen4
    Participant

    Went to this 5 months ago.
    Original fault was: when you open and close the oven door, it clicks and the temperature resets to (180 or 150 – can’t quite remember).
    I traced it to a relay on the control module (491993) and replaced the module.
    All seemed well.

    Had a phone call this morning, saying that about a month after I’d been, they put it through a self-clean and the fault returned intermittently.
    It got more and more frequent, until now it resets the temperature pretty much every time the door’s opened again. 😯

    I’m suspecting there’s something more to it than the control module – any ideas, please?

    Thanks,
    Pigpen.

    March 27, 2011 at 6:30 pm #347841
    Pigpen4
    Participant

    Re: Siemens oven HB760560B/02 temperature resets itself

    Anyone, please?

    March 30, 2011 at 6:38 pm #347842
    Pigpen4
    Participant

    Re: Siemens oven HB760560B/02

    Perhaps somebody might at least have a wiring diagram or some other tech info they could let me have?
    Please?

    April 5, 2011 at 7:10 pm #347843
    rocker
    Participant

    Re: Siemens oven HB760560B/02

    customer of mine had a similiar problem after a self clean on a bosch oven. I have no knowledge of these ovens, but someone on this site told me a (stat/sensor) was the cause,and they had upgraded this part.
    never done the job,so cant give you any more info.
    good luck

    April 6, 2011 at 11:34 am #347844
    Pigpen4
    Participant

    Re: Siemens oven HB760560B/02

    Many thanks, Rocker.
    I’ll try and find the stat/sensor.
    Cheers,
    Pigpen.

    April 6, 2011 at 6:44 pm #347845
    Pigpen4
    Participant

    Re: Siemens oven HB760560B/02

    I found 423842 Sensor-PTC on Connect’s site.
    I’m going to order one and try it.
    Do you reckon that will sort it out?

    Any Siemens experts out there willing to give me a clue, please?

    Cheers,
    Pigpen.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.