- This topic has 1 reply, 2 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
good morning gentlemen,
We have a white knight 767c. It had a heater failure which resetting the trip on the back, did not resolve. so I replaced the heating element. The heater element works ok and heats up appropriately. However the trip keeps on tripping out. I have therefore replaced the tripswitch, (behind the red cover on the rear of the drum mount). It still continues to trip out. Gets to temerature, runs for a while and the heater trips out/switches off, (motor continues to turn the drum.the trip switch then gets manually reset and heater turns on again and the cycle continues, seems to be about 15 to 20 minute sessions, but that is not an accurate count.
Questions: Is there something I should look at?
Is there something obvious that I have ommitted to do?
Where should I next look?
Any help will be appreciated.
John
- You must be logged in to reply to this topic.