VTD60P Power Board?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › VTD60P Power Board?

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 26, 2011 at 10:15 am #62421
    OLLIE2806
    Participant

    VTD60P
    504110107
    9531342000

    Does anyone know the correct number for the power board at the bottom using the serial no etc above? Will it need a smart card?

    Thanks in advance

    April 26, 2011 at 4:37 pm #350066
    iadom
    Moderator

    Re: VTD60P Power Board?

    Do you really want to bother?

    5 different eeproms, 5 different smart cards and 3 different PCBs.

    So yes, it does need programming. 😥

    Jim.

    April 27, 2011 at 6:24 am #350067
    OLLIE2806
    Participant

    Re: VTD60P Power Board?

    Is there a number on anything on the old board that would help me get the right one? or is looking a bit pot luck time again? lol

    April 27, 2011 at 9:03 am #350068
    iadom
    Moderator

    Re: VTD60P Power Board?

    Have you checked with EMW to see if they repair these boards?

    Do you have a card reader?

    Nothing really on the board that would help TBH.

    It also looks as though Indesit may send out pre progammed PCB’s but there are three of them as well. :rolls:

    April 27, 2011 at 3:50 pm #350069
    OLLIE2806
    Participant

    Re: VTD60P Power Board?

    okey dokey, Sounds like a bit a fair bit of hassle. lol. Thanks for your help though mate. Much appreciated.

    April 27, 2011 at 6:56 pm #350070
    iadom
    Moderator

    Re: VTD60P Power Board?

    I can try and identify the correct parts if you wish, just takes a fair bit of time to work through all the permutations. 😥

    April 27, 2011 at 7:33 pm #350071
    OLLIE2806
    Participant

    Re: VTD60P Power Board?

    No that’s fine Jim, it’s not in the best of shape at all to be honest so they’re going to get a new one. Thanks though.

    April 27, 2011 at 7:58 pm #350072
    colly
    Participant

    Re: VTD60P Power Board?

    What was the fault ?
    Colin

    April 27, 2011 at 8:48 pm #350073
    OLLIE2806
    Participant

    Re: VTD60P Power Board?

    Power going to that board but no further – no power to top board – wont turn on

    April 28, 2011 at 5:30 am #350074
    colly
    Participant

    Re: VTD60P Power Board?

    Have you checked the one shot stat on the heater element ?
    Causes whole machine to be all off
    Colin

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.