wiring diagrams please for Siemens D/W – SE25A090GB/12

Re: wiring diagrams please for Siemens D/W – SE25A090GB/12

twicknix wrote:There’s a wire coming from the front door to the heater switch and it piggy back onto another connector but it looked like I wrote it down as White/Red piggy back White/Purple but the thickness of the wires confused me. The white/red is thicker than the white purple. Not wanting to blow it up, is this correct?

These wires together go onto the heater safety microswitch (bottom terminal) with the Short White/Green on the microswitch (top terminal) going to the right hand heater terminal.

twicknix wrote:And lastly where does the end pipe from the steam vent goes? It appears to be just a vent pipe not connected to owt except for the rear hole facing to the floor. Just want to clarify it that’s all.

The end of the vent pipe goes through a plastic moulded retainer just above and beyond the mains filter/terminal unit at the back!

HTH? 😀

P.S. In future always take a photo (with your mobile) before you start taking any wires off! :lesson:

Re: wiring diagrams please for Siemens D/W – SE25A090GB/12

twicknix wrote:so I wrote it correct that the two wires piggy back?

Indeed so! 😀

twicknix wrote:What HTH means?

Hope That Helps. :rolls:

twicknix wrote:It’s a lot of work taking the dishwasher apart. I wonder what the other engineers make of this. Is it worth doing it or walk away?

Only cowboys walk away, we ‘engineers’ welcome a challenge, don’t we? And once you’ve done a few ( or hundreds like I have) you can fix them blindfolded. 😀 😉