- This topic has 3 replies, 3 voices, and was last updated 14 years, 10 months ago by
.
-
Posts
-
This machine is aroung 1yr old..fills with some water drum turns a couple of times, sits around after some minutes,will turn again once..and so on..have tightened and refitted cable plugs to pcb timer.
checked heater ok..thermister reading 25megohms (is this reading correct !!)
any advice welcome. thanks JohnRe: Candy G0282 (washing machine)
I would have thought that 25k be more in line with what it should be, your meters ok is it?
Re: Candy G0282 (washing machine)
found this intresting it may help tho
A) DESCRIPTION OF THE TROUBLE:
We’ve recently been informed of some rare cases of the trouble as in subject, where the
selection of the “Easy Ironing” function coupled to one of the Washing Programs of the ranges
for Mixed & Delicate Tissues, was apparently resulting into a never ending Washing Phase.
Since the Phase of Washing is not going to end normally, it’s then necessary to move the
Programs Selector knob back to the OFF position, and keep it there for some moments. Then,
manually set the “Rinse Only” Program, to end the washing.
B) SOLUTION OF THE TROUBLE:
The “Cuore” Power Module originally fitted in the Factory on the Appliances as in subject, is
not reliable enough and must not be reprogrammed. Therefore replace the original Power
Module with a not programmed spare one by GIAS and P/N. 49019555. Program the new
Power Module with the related Software, with the MEM Programming Tool.
Should the MEM Programming Tool not be available, please order to GIAS the related already
programmed Power Module, getting its part number from the Spares List of the Giastech Web.
- You must be logged in to reply to this topic.