indesit iwb 5113

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit iwb 5113

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 17, 2011 at 7:20 am #62836
    clockworkone
    Participant

    looking for fault codes or test procedure for this m/c. fault reported sounds like a tach fault.no natural progression of program. m/c has been leaking since frost :rolls: and is in outhouse.cust says it is only a year old.will replace valve once other fault is sorted. paul

    May 17, 2011 at 11:57 am #351471
    Martin
    Participant

    Re: indesit iwb 5113

    clockworkone wrote:m/c has been leaking since frost :rolls: and is in outhouse.

    Not looking good for the module then….. :rolls:

    As far as error codes goes, they are given by the usual flashing LED’s of one or more of the ‘option’ buttons as well as the ‘start/pause’ button. Then, depending on whether they are located left to right or top to bottom, check the numerical order of those ‘option’ LED’s for the usual Indeshit code listing in Known Error Codes or the UKW Bible…..Amen! 😀

    May 17, 2011 at 1:05 pm #351472
    clockworkone
    Participant

    Re: indesit iwb 5113

    thanks martin,removed motor,a lot of carbon sludge in it also removed and cleaned tacho put it back and it worked. they lucky with module as spray marks from belt evident on it.thanks again

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.