- This topic has 2 replies, 2 voices, and was last updated 14 years, 10 months ago by
.
-
Posts
-
Can anyone explain how to remove the impellor on the wash pump along with the seal please?
I can’t quite tell from looking at the new one if it just pulls off, or screws off, or if there are secret clips 😕
I have had a look through the tips and tricks post and done a search. I have found reference to the sealing kit but not to it’s removal.
Many thanks
Chris
Re: Bosch dishwasher SRV43M03GB/24 Removing impellor on wash
hi there
yes i usually carefully place a screw driver in the back of the motor to stop it moving then grab the impellor with my other hand and it should screw off in an anti clockwise direction once this is off you should be able to pull off the rubber outer seal and the lift off the plastic housing and carefully sprize out the centre carbon face seal.
then just put it back in reverse
good luck
- You must be logged in to reply to this topic.