- This topic has 0 replies, 1 voice, and was last updated 14 years, 11 months ago by
.
-
Posts
-
Hi,
I’m hoping somebody can please help me.
The control PCB from my Indesit DI 620 dishwasher has gone faulty. I am an electronics engineer, so when my dishwasher went faulty, I decided to again strip down my dishwasher.
On inspection of the control PCB, the board was burnt. On removal from the machine, the circuit board trace were the mains input to the board is and where the 130 ohm 3 watt resistor has burnt away. The 130ohm 3 watt resistor is burnt out.
I have removed the faulty 130 ohm 3 watt resistor and all the other components test okay.
THE MAJOR problem I have is, with the trace being so badly burnt, I have no 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} way of ensuring that I have repaired the trace on the circuit board correctly.
Has anybody got a circuit board they could photograph from the trace side and post on here or email it to me?
I know this is a big request, but please help somebody 🙂
Full respect
Scooterck
- You must be logged in to reply to this topic.