- This topic has 7 replies, 5 voices, and was last updated 21 years, 6 months ago by
.
-
Posts
-
Got a wierd fault on this m/c
1st visit a rug had exploded and blocked the pressure system and pump ,Cleaned out and tested all okay
Cust did one wash all ok
Then called me back as the machine wouldnt advance,Element okay PCB board timer seems to sit and clck so I ordered a prog ,Fitted I am left with no supply to the element ,Timer cam switches okay but no motor action ,but motor seems to check out okay ,Phoned BEKO (that was a laugh)
What am I missing ?
LawrenceRe: BEKO WM 1412s
Lawrence wrote:What am I missing ?
Links ? One’s that need cutting or tabs need breaking off ?
Never fitted one so I don’t know if they need that doing.
Faulty new control unit is the more likely though 🙁
Dave.
Re: BEKO WM 1412s
Does anyone have a telephone no for Beko as I am getting nowhere fast with this 😥
Lawrence
Re: BEKO WM 1412s
Text you with it in the morning. If you get stuck for parts give me a ring Be aware that they aren’t too helpful at Beko, always trying to get you to buy a manual from SEME!!!
Re: BEKO WM 1412s
Hi,
weve had similar to this where we could not get to heat, new timer did not cure or swopping module. We are now awaiting a loom even though we could not fault the heat circuit on the existing loom. The original call was to intermittent spin even though we could not fault the spin cycle.
kevin
Re: BEKO WM 1412s
You can get the manuals from SEME at £1.35 each, there are two listed against this model.
Nil stock though unsurprisingly 🙁
I may place one on backorder just to see what you get for that money 😉
Dave.
You get assembly/dissassembly instructions, circuit and wiring diagrams and exploded diagrams with parts listings.
There’s no in-depth tech info at all.
Chris.
- You must be logged in to reply to this topic.