Belling Farmhouse 930 Electric. Parts Needed

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Belling Farmhouse 930 Electric. Parts Needed

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 6, 2011 at 9:28 am #63198
    The Equalizer
    Participant

    Hi Y’all

    I have noticed that on my Farmhouse 930, where the Main Oven Door seal has come unstuck and is hanging down, the escaping heat has damaged the Fascia board above where the Hob/Oven Control knobs are situated.
    Aparently it’s quite common on these Ovens.

    I just wondered if anyone could point me in the direction of a parts retailer that I can trust, for the Fascia & also parts to repair/replace the Door Seal.
    Unfortunately UKWG Shop could not help in this instance.

    Many Thanks

    E 🙂

    June 6, 2011 at 9:47 am #352945
    kwatt
    Keymaster

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hi,

    Should be able to do that, but… 🙂

    Can you have a look about for the rating plate and get all the numbers you can off it? Belling has changed hands and had cookers made by several different companies and factories, it’s just to be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure.

    There seems only to be the different colours on that one though and I’d need to know if it was black, blue, champagne, green or red for the fascia? 😉

    K.

    June 6, 2011 at 12:25 pm #352946
    The Equalizer
    Participant

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hi there I have pulled the oven out & there is no rating plate on the back, front or either side?

    Where is it likely to be hiding?

    June 6, 2011 at 12:39 pm #352947
    kwatt
    Keymaster

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Warming/storage drawer or inside the main oven door frame… usually. :rolls:

    K.

    June 6, 2011 at 12:50 pm #352948
    The Equalizer
    Participant

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hi again Kwatt

    I checked both, no plate. The Storage drawer. where we keep all the baking trays etc, hasn’t got it, I have thoroughly checked that.
    The main oven also. I checked the Grill & other oven just to be sure.
    When you say “inside the main oven door frame”, is this visible without taking anything apart?

    June 6, 2011 at 1:16 pm #352949
    The Equalizer
    Participant

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hi Kwatt

    Sorry mate, it looks like its missing.
    I’m not daft, I’ve had to look for Vin Plates on a car before that have been hidden, but this rating plate is either missing or hidden inside somewhere.
    I pulled the oven out again checked all 3 sides, opened all four doors, checked each door, door edge, framework around each door.
    It’s either fallen off, or been taken off. I’m gonna have a hunt in the loft for the user manual manual, there might be some info in there.

    June 6, 2011 at 5:46 pm #352950
    Washman
    Participant

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hi

    You need to remove the Warming/storage drawer completely to find the numbers .

    Washman

    June 6, 2011 at 7:30 pm #352951
    The Equalizer
    Participant

    Re: Belling Farmhouse 930 Electric. Parts Needed

    Hey Washman

    Just to confirm.

    Thats the drawer at the bottom that holds all the pot and pans.

    Ok, I’ll get to it.

    Thanks to you & Kwatt for the advice.

    E

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.