sgs6312 gb bosch d/w leak under pressure on gutter seal

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries sgs6312 gb bosch d/w leak under pressure on gutter seal

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #63256
    EVANO
    Participant

    Hi all hope everyone ok

    Got the above d/w and intermittently got a leak, when under pressure, from the gutter seal any ideas 🙁

    many thanks

    linda

    #353130
    Martin
    Participant

    Re: sgs6312 gb bosch d/w leak under pressure on gutter seal

    EVANO wrote:when under pressure, from the gutter seal

    I would guess by “gutter seal” you mean the bottom door seal? That being the case then it must be perished and need of replacing anyway considering its age.

    “Under pressure”? :hmm: I’m stuck on that one though, sorry. Have you cleaned out the transfer pipe and pressure chamber?

    Note to mods:
    Maybe some kind moderator can move this thread into Trade Technical. 💡

    #353131
    Criscold
    Participant

    Re: sgs6312 gb bosch d/w leak under pressure on gutter seal

    Have you checked that the lower wash arm support hasn’t become uncliped from the arm and that the arm is not split. Either of these would cause water to come out under the door whilst under pressure

    #353132
    wizard
    Participant

    Re: sgs6312 gb bosch d/w leak under pressure on gutter seal

    Blocked breather. Will either be attatched to the rear of the detergent dispenser (rigid clear pipe), or the right hand side of the main tank (flexi clear pipe) depending on the age of the machine. It allows air pressure to escape from the main tank. If it’s blocked the pressure finds the weakest point, ie the lower door seal. Wiz

    #353133
    EVANO
    Participant

    Re: sgs6312 gb bosch d/w leak under pressure on gutter seal

    Thanks boys will send hubby out to machine and check it out will let you know what it was

    ta
    linda

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.