- This topic has 2 replies, 2 voices, and was last updated 14 years, 10 months ago by
.
-
Posts
-
Hi, I have a Fisher Paykel DD603H dishwasher and the plastic panel that includes the handel and covers the top edge of the lower draw/LCD and switches is cracked.
How easy is it to replace as I cant see any fixings and are they expensive?
ThanksRe: Fisher Paykel DD603H – handel panel replacement advice??
Assuming you have a silver dishwasher the part number for the handle is 528525 which you can buy direct from F&P and it will probaly cost less than £20 to buy.
If you look on both sides of the tub just behind the drawer front you will see a plastic screw, grab each with a pair of pliers and pull, once off pull the metal drawer front down and away from the tub. Go to the right hand side of the handle and push handle to the left and it will come off, the rest is obvious.
Kill the power before taking the cover off :zap:
John
Re: Fisher Paykel DD603H – handel panel replacement advice??
Hi, Thnaks for the info. Yes its the s/s version just like this:-
http://www.vanns.com/shop/servlet/item/ … /313994787
So are you saying you have to remove the main steel panel that is on the front of the draw so that you get access to the upper plastic panel? And are these screws near the bottom edge as I dont remember seeing any screws on the inside edge on either side? I assume we are talking about the same panel, the one that cover the display and is also the handle?
Cheers
- You must be logged in to reply to this topic.